Prolonged Storage; Technical Specifications; Motor; Battery - EMOTION BH EVO Manual Usuario

EN
USER MANUAL

Prolonged Storage

If you are going to store the bicycle for a prolonged period (1 month or more), remove the battery and store it as follows.
• Make sure that the remaining battery capacity is above 50% and then store it indoors, in a cool
(10 to 20°C) and dry place.
• Check the remaining battery capacity once a month, as the battery is slowly discharged while in
storage.If the capacity is below 50%, charge it until it is above 50%.
• When using it again after a prolonged period of storage, be sure to charge the battery before use.

TECHNICAL SPECIFICATIONS

Motor

• BH continuous current brushless motor.
• 250 W power (500 W in NITRO and AWD models).
• Maximum assistance speed 25 km/h (45 km/h in NITRO models and 35 km/h in AWD models).
• System voltage:
1.
2.

Battery

• Lithium-ion battery.
• Battery voltage:
1.
2.
• Capacity:
1.
2.

Central Display Panel

• USB type: USB 2.0.
• Output current: max. 1,000 mA.

FAQ

What is this bicycle's maximum speed?
It depends on the user. There is no maximum speed. However, at speeds over 25 km/h, the pedal assistance
provided by the motor is disabled. This restriction on assistance is a legal requirement for pedal-assist bicycles,
according to European regulation EN 15194.
The NITRO and AWD models are an exception as they are not approved as pedal-assist bicycles. The maximum
assistance speed is limited to 45 km/h in NITRO models, which are approved as motorcycles. In the case of
AWD models, the maximum assistance speed is limited to 35 km/h and they are solely intended for off-road use.
48
EVO, AWD and NITRO models: 48 V.
EASYGO models: 36 V.
EVO, AWD and NITRO models: 48 V.
EASYGO models: 36 V.
EASYGO model: 250 Wh.
EVO, AWD and NITRO models: 500 Wh or 600 Wh (depending on version).
EASYGO / EVO / NITRO / AWD