Tabla de contenido
Idiomas disponibles
Idiomas disponibles
GB
Preliminary check
Before installing the motor, check the topics below:
Gate structure must be tough and there must not be any friction between the wing
·
and its pivot;
Gate pivots must work correctly and be lubricated enough;
·
There must be a closing limit stop to avoid to overrun of the wing (if a mechanical
·
stop is not used).
Brackets fixing on the column and on the gate (drawing 1 and drawing 2)
Once you checked that the motor can be installed, fix the bracket plate on the column
100mm far from the ground (use 14 rawplug and M8 screws); fix now the bracket plate on
the wing (use M6 screws), following the quotes in the table 1 (if mechanical stops are not
used) or in the table 2 (if mechanical stops are used).
D
34
A
C
Drawing 1
Tabla de contenido
