Safety and operation labels
A hedge trimmer has the potential to cause
serious personal injury to the operator or
bystanders if misused, abused or mishandled.
You must observe all special safety instructions
to reduce the risk of personal injury.
Read and follow this manual, make sure anyone
using the trimmer does likewise. Failure to do
so could result in serious personal injury or
machine failure. Keep this manual for future
reference.
Always wear a hard hat to reduce the risk of
head injuries during operation of this machine.
In addition, always wear eye and hearing protec-
tion. Shindaiwa recommends wearing a face
shield as additional face and eye protection.
Safety
Work Safely
A hedge trimmer has the potential to cause serious personal injury to the operator or bystanders if misused, abused
or mishandled. To reduce the risk of injury, you must maintain control at all times, and observe all safety precautions
during operation. Never permit a person without training or instruction to operate this machine!
Stay Alert
You must be physically and mentally fit to operate this unit safely.
WARNING!
Hedge Clipper blades are very sharp. Touching them may lead to severe personal injury. Avoid touching
blades whenever possible, and always wear gloves to protect hands
WARNING!
Never make unauthorized attachment installations. Always use genuine Shindaiwa parts and accesso-
ries when repairing or maintaining this unit.
WARNING!
Operation of this equipment may create sparks that can start fires around dry vegetation. This unit is
equipped with a spark arrestor and a spark arrestor may be required. The operator should contact local fire
agencies for laws or regulations relating to fire prevention requirements.
WARNING!
Never operate power equipment of any kind if you are tired or if you are under the influence of
alcohol, drugs, medication or any other substance that could affect your ability or judgement.
WARNING!
Moving parts can amputate fingers or cause severe injuries. Keep hands, clothing and loose objects
away from all openings.
• ALWAYS stop engine, disconnect spark plug, and make sure all moving parts have come to a complete stop
before removing obstructions, clearing debris, or servicing unit.
• DO NOT start or operate unit unless all guards and protective covers are properly assembled to unit.
• NEVER reach into any opening while the engine is running. Moving parts may not be visible through open-
ings.
WARNING!
Engine exhaust IS HOT, and contains Carbon Monoxide (CO), a poison gas. Breathing CO can cause uncon-
sciousness, serious injury, or death. Exhaust can cause serious burns. ALWAYS position unit so that exhaust is
directed away from your face and body.
The blades are SHARP. Handle with care.
Keep hands clear of the cutter blades when
starting the engine.
WARNING !Surface can be hot. Always wear
gloves when handling this unit.
HOT SURFACE
3