Ifting And Transporting The Machine; Practical Guide For The Operator; Controls - Description 512 - 712 Rider - IPC 512 Serie Manual De Instrucciones

5.4. Lifting and transporting the machine
All phases must be performed in an adequately lit room and adopting the safety
The operator must always use personal protection devices.
To load the machine onto a means of transport, proceed as follows:
•
Empty the bin
•
place the machine on the pallet and fix it with plastic straps or metal brackets;
•
lift the pallet (with the machine) using a fork lift truck and load it onto the means of
transport;
•
anchor the machine to the means of transport with cables connected to the pallet
and machine itself.
6.
6.1. Controls – Description 512 – 712 RIDER
With reference to fig. C, the machine has the follow controls and indicator lights:
On/OFF switch (fig. C, ref. 1): turns the machine on and off
Emergency button (fig. A, ref. 16): enables/disables all functions of the machine.
Suction button (fig. C, ref. 2): enables/disables the suction function.
Brush button (fig. C, ref. 3): enables/disables brush operation.
Filter shaker button (fig. C, ref. 4): enables the filter shaker.
Battery charge LED (fig. C, ref. 5): 3 LEDs indicating the battery charge:
green light battery fully charged
yellow light battery almost flat, recharge
red light battery flat
Centre brush pressure LED (fig. C, ref. 6): 6 LEDs indicating the pressure of the centre
brush on the work surface. The pressure exerted by the brush on the floor is calculated by
means of the current absorbed by the centre brush motor:
green lights, light pressure
yellow light, medium pressure
red light, heavy pressure
If the red light (LED 6) comes on, all LEDs start flashing.
Two minutes after the red light comes on, the brush function is shut down
automatically.
Centre brush pressure regulation handle (fig. A, ref. 8): regulates the pressure of the
IMPORTANT
measures most appropriate to the situation.

PRACTICAL GUIDE FOR THE OPERATOR

ENGLISH
10