SET-UP
8 INTEGRATED SEAT POST TIGHTENING SYSTEM /RAPT 2.1/RAPT 2.2/DH PENDBOX
Completely integrated in the top tube, this tightening system is composed of two biting pieces activated by
an allen/hex bolt. As it presses the seat tube this one stays in the desired place. There is also a significant
reduction on weight and the advantage of avoiding the possibilities of rips or accidents.
Steps to follow :
1- Insert the seat post in the frame.
2- Insert the biting pieces and the bolt as shown in the picture.
3- Standstill the seat post on the desired position and screw the bolt, torque 10-11 Nm for the Rapt and 2-3
Nm for the DH.
9 INTEGRATED SEAT POST TIGHTENING SYSTEM /RAPT 2.1/RAPT 2.2/DH PENDBOX
Those dropouts are used as rear derailleur/mech hanger, as chain tensioner for the single speed configurations and
also to change the performance of the bike. As you change the length of the chain stays with the dropouts you can
adapt the performance of your bike to your needs.
Steps to follow :
SET-UP
1- Completely screw the two adjuster bolts.
2- Unscrew the four tightening bolts
3- Push the drop outs to the front.
4-Unscrew the adjuster bolts to move the drop outs to their position and/or to the desired chain tension.
5- Standstill the drop outs with the four tightening bolts. Torque at 8-10 Nm.
III - SPECIFIC MODELS
SPECIFIC MODELS - 17