Inserting Or Replacing The Batteries - ReliOn Premier BLU Manual Del Usuario

Inserting or Replacing the Batteries

• The ReliOn™ Premier BLU Blood Glucose Meter uses two 3.0 V
lithium batteries.
• Do not mix old and new batteries.
• Do not mix alkaline, standard (carbon-zinc) or rechargeable
(ni-cad, ni-mh, etc.) batteries.
• Before using the meter, check the battery compartment and
insert batteries if empty.
• When the
is in use, the batteries should be replaced as soon as possible.
• The test results may not be saved if the batteries run out.
Step 1
Make sure the meter is turned off. Push the
cover in the direction of the arrow to open
the battery compartment.
Step 2
Remove the used batteries and insert
two new batteries with the '+' side
facing up. Make sure the batteries are
inserted firmly.
Step 3
Place the cover on the battery compartment.
Close the battery cover firmly. A click may
be heard.
NOTE
• Removing the meter batteries will not affect your stored results.
However, meter setting may need to be reset, see page 17.
12
symbol appears on the display while the meter