Inserting Or Replacing The Batteries - ReliOn Premier Classic Manual Del Usuario

Inserting or Replacing the Batteries

• The ReliOn™ Premier Classic Meter uses two AAA alkaline batteries.
• Do not mix old and new batteries.
• Do not mix alkaline, standard (carbon-zinc) or rechargeable
(ni-cad, ni-mh, etc.) batteries.
• Before using the meter, check the battery compartment and
insert batteries if empty.
• When the
is in use, the batteries should be replaced as soon as possible.
• Test results may not be saved if the batteries run out completely.
Step 1
Make sure the meter is turned off. Press firmly
on the battery cover and slide in the direction
of the arrow. Then, swing it open.
Step 2
Remove the used
batteries and insert the
two new batteries.
Close the battery cover
firmly.
NOTE
• Removing the meter batteries will not affect your stored
results. However, meter settings may need to be reset, see
page 16.
10
symbol appears on the display while the meter