Tilt the appliance rearward.
Place the disc brush/driver plate onto
the actuator and turn in anti-clockwise
direction.
Fill the detergent tank (option)
WARNING
Risk of damage. Only use the recommend-
ed detergents. With other detergents, the
operator bears the increased risk regarding
the operational safety and danger of acci-
dent.
Only use detergents that are free from sol-
vents, hydrochloric acid and hydrofluoric
acid.
Follow the safety instructions for using de-
tergents.
Fill detergent solution into the detergent
tank.
Operation
WARNING
Risk of injury! The operation of the appli-
ance requires practice.
– Ensure that there are no obstacles in
the area to be cleaned.
– Check the floor consistency for its suit-
ability.
– The handling becomes more difficult
with uneven or rough surfaces.
Adjust handle
WARNING
Risk of accident due to loss of control over
the appliance. Do not adjust the handle un-
less the motor is at a standstill.
Pull the lever for level adjustment.
Tilt the handle into a comfortable posi-
tion (arms outstretched).
Release the lever for level adjustment.
Turning on the Appliance
ATTENTION
Risk of damage to the floor covering. Do
not operate the appliance on the spot.
Insert the mains plug into a socket.
Note:
To unlock the ON/OFF switch, the handle
must be lowered at least 3 steps down from
upright position.
Set handle to working height.
Hold the handle with both hands.
Press and hold the unlocking button.
Use the ON/OFF switch.
Release the unlocking button.
Release the switch to interrupt opera-
tion.
Control the direction
– Left: Press the handle downward.
– Right: Raise the handle.
Apply the detergent solution to the floor
or use the dosing lever of the detergent
tank (option).
Move the appliance over the surface to
be cleaned.
Repeat process for severe contamina-
tion.
Afterwards, pick up the wastewater with
a wet vacuum or a cloth.
– 3
EN
Cleaning
5