Humidifier Performance - ResMed AirCurve 10 ST-A Guia Del Usuario

Pneumatic flow path
Design life
Device, power supply unit:
Cleanable water tub:
Standard water tub, air tubing:
General
The patient is an intended operator.
Operator position
The device is designed to be operated within arm's length. An operator should position their line of sight within an angle of
30 degrees from a plane perpendicular to the screen.

Humidifier performance

Mask Pressure Nominal RH output %
cm H O (hPa)
Setting 4
2
3 85
4 85
10 85
20 85
25 85
30 85
1
AH - Absolute Humidity in mg/L
2
BTPS - Body Temperature Pressure Saturated
Air tubing
Air tubing Material
ClimateLineAir Flexible plastic and electrical components
ClimateLineAir Oxy Flexible plastic and electrical components
SlimLine Flexible plastic
Standard Flexible plastic
3 m Flexible plastic
Heated air tubing temperature cut-out: ≤ 106°F (≤ 41°C)
Notes:
• The manufacturer reserves the right to change these specifications without notice.
• The electrical connector end of the heated air tubing is only compatible with the air outlet at the device end and should
not be fitted to the mask.
• Do not use electrically conductive or antistatic air tubing.
• The temperature and relative humidity settings displayed are not measured values.
1. Flow sensor
2. Blower
3. Pressure sensor
4. Mask
5. Air tubing
6. Water tub
7. Device
8. Inlet filter
5 years
2.5 years
6 months
Nominal system output AH
Setting 8 Setting 4
100 6
100 6
100 6
90 6
90 6
90 6
Length
6'6" (2 m)
6'4" (1.9 m)
6' (1.8 m)
6'6" (2 m)
9'10" (3 m)
1 , BTPS 2
Setting 8
>10
>10
>10
>10
>10
>10
Inner diameter
0.6" (15 mm)
0.75" (19 mm)
0.6" (15 mm)
0.75" (19 mm)
0.75" (19 mm)
English 21