NOTE
The battery must be fully charged
initially to improve battery lifetime.
NOTE
Your phone has an Internal Antenna.
Be careful not to scratch or damage
this rear area, as that will cause loss of
performance.
When charging your phone with a fully
discharged battery, the keypad LED
will briefly flash indicating charging
is occurring in a mode designed to
prevent battery damage. The blinking
will stop and normal charging will
commence once a sufficient minimum
charge has been established.
Inserting a microSD card
Insert a microSD™ card to use the camera
and other multimedia features. Multimedia
contents can be saved in the microSD
card.
NOTE
This device supports up to a 32GB
microSD card.
1
Turn the phone off before inserting or
removing the microSD card. Remove the
back cover.
Release Latch
15