Chapter Four Troubleshooting - TSI Alnor 9880 Manual Del Usuario

Table 2 lists the symptoms, possible causes, and
recommended solutions for common problems
encountered with the meter
listed, or if none of the solutions solve your
problem, please contact TSI.
There is a five-pin connector on the
Model 9880 which is visible when the battery
cover is removed. This connector is meant for
factory calibration purposes only and must not
be used in a hazardous environment.
Table 2: Troubleshooting
Symptom
No display
CHAPTER FOUR
Troubleshooting
WARNING
Possible
Causes
Unit not
switched on
Low or dead
batteries
Dirty battery
contacts
If your symptom is not
.
Corrective
Action
Switch unit on
Replace
batteries
Clean battery
contacts
13