Tabla de contenido
specialists
to property
works regulations
GENERAL NOTE
In addition to these instructions, compliance with the
safety and commissioning information or operating
instructions for the associated motors is always necessary.
1
Description
1.1
Application
Intended use:
Ambient temperature:
1.2
Design and mode of operation (see Fig. 3)
mechanical manual
1.3
Approved use:
2
Operation
WARNING
All work must be carried out on the equipment
in the de-energized state!
2.1
Electrical wiring
ã
Siemens AG 2003 All Rights Reserved
WARNING
qualified,
responsible
injury
damage
national, local
requirements
-20° C to 40° C
Lü
ENGLISH
High-speed brake application
Releasing the brake with the motor switched off
Voltage and frequency
rectifier
connection
230V ± 10% 50/60 Hz
magnetic coils
2.2
Operating values (see Fig. 4)
2.3
Changing the braking torque (see Fig. 2)
Br min.
2.4
Maximum permissible RPM
not-stop feature
not-stop feature
3
Maintenance
air
The air gap is adjusted as follows:
400V ± 10% 50/60 Hz
205 V DC
180 V DC
1
Fig. 4
air max.
air nom.
3
Tabla de contenido
