Tabla de contenido
Idiomas disponibles
Idiomas disponibles
5.3.
CLEAR: "CLR" KEY
If you want to cancel the stored tests results proceed as follows:
RCL
1.
Press the RCL/ESC key. The instrument displays a screen like the
ESC
following:
2.
Use the
ATTENTION:
The instrument will cancel all the results stored from the memory location
selected to the last.
3.
Press the DISP key to display the test result related to the memory
DISP
location selected.
CLR
4.
Press CLR once. The blinking symbol "
two possibilities:
CLR
Number of the memory location in which the
measurement result was stored.
Value of the parameter PLA related to the
saved measurement.
&
keys to select the number of the memory location.
Last location with data stored.
The instrument cancels the memory cells from
n.2 to n.8, where n.2 is the one selected by
the operator while n.8 is the last test saved in
the instrument.
Press CLR again if the tests selected are to be cancelled
starting from the one selected down to the last one saved.
RCL
ESC
MEM
Pla
02
clr"
is displayed. Now you face
MEM
3
i
C
02
08
Capítulos
Tabla de contenido
