Nokia N900 Manual Del Usuario página 35

encryption reduces the risk of unauthorized access to
your data.
Available WLANs
After the WLAN scan, all available WLANs are displayed with
the following information:
Connection type, indicated with
•
hoc)
Name
•
If the WLAN is already saved in your device,
•
displayed.
WLAN signal strength, indicated with
•
Encryption method used, indicated with
•
(WEP), or (none)
Security settings
Select Settings and
>
Connections.
In the connection setup dialogs, enter the encryption keys,
depending on the Wi-Fi connection in question. For stronger
security, it is recommended that you use the WPA method, if
possible.
© 2010 Nokia. All rights reserved.
(general) or
is
(WPA),
Internet connections
>
WEP authentication
Enter the wireless equivalent privacy (WEP) key. You can
define more than one WEP key, and you can also select the
default key, if that is required by your WLAN.
WPA authentication
Enter the Wi-Fi protected access (WPA) preshared key. The key
(ad
length must be between 8 and 63 characters. Only ASCII
characters are allowed.
WPA with EAP type
To define the extensible authentication protocol (EAP) type,
select from the following:
TLS (transport layer security) authentication — Select the
client certificate used for authentication.
PEAP (protected extensible authentication protocol)
authentication or TTLS (tunnelled transport layer
security) — Select an authentication method used inside
PEAP or TTLS and an optional client certificate.
For MSCHAPv2, define a user name and a password. Select the
Prompt password at every login
your password to be always requested when a connection is
created. For GTC, enter your user name. You are prompted for
a response upon connection creation. The client certificates
are optional. For more information, contact your internet
service provider.
Connect your device
check box, if you want
35