Standard Equipment - Virutex SRB165 Manual De Instrucciones

Depth setting.........................................................0-54 mm
Inclination setting.....................................................0-55º
Weight without battery....................................................2.9 Kg
Sound pressure.......................................................80,9 dB (A)
Acoustic power........................................................91,9 dB (A)
Weighted vibration.......................................................0,77 m/s
3. RECOMMENDATIONS
Follow very carefully the instructions in this manual,
save itand keep it close at hand, ready to carry out any
inspection of parts that may be necessary.
If the tool is used with care and normal maintenance is
carried out, it will work well for a long time.
The functions and use of the tool you have bought shall
be only those described in thi this manual. Any other
use of the tool is strictly forbidden.
Before inserting the battery cartridge into the tool, always
check to see that the On/Off trigger 6 (Fig. 10) actuates
properly and returns to the "OFF" position when released.
4. COMPONENTS
DESCRIPTION (See Fig. 9)
1. Dust extraction adapter
2. Battery cartridge *
3. Battery lock
4. Cutting depth scale
5. Protective guard
6. On / off switch
7. Lock-off button
8. Spindle lock button
9. LED light
10. Scale for mitre/bevel angles
11. Wing bolt for mitre/bevel angle preselection
12. EAuxiliary handle
13. Adjusting lever for protective guard
14. Saw blade
15. Clamping bolt for saw blade
16. Clamping flange
17. Retracting blade guard
18. Cut mark 0°
19. Cut mark 45°
20. Base plate
21. Wing bolt for parallel guide
22. Ventilation slots
23. Indicator "High-torque mode"
24. Fixing lever
25. Button for battery charge indicator *
26. Battery charge indicator *
27. Allen Key
28. Parallel guide
29. Cargador *
30. Screw
31. Internal flange
32. Spindle
33. Charger sticker *
18
34. Indicator (red) *
35. Indicator (green) *
* Not included

5. STANDARD EQUIPMENT

2
- Parallel guide
- Allen key
- Instructions manual.
- Warranty
6. SPECIFICATIONS OF THE TOOL
The cordless circular saw is designed for cutting, in
straight line, wooden piece-parts.
Brushless motor
Power tool equipped with a brushless motor that provides
the following advantages (compared to the power tool
having a brush motor):
• High reliability due to the lack of wearing parts (carbon
brushes, commutator).
• Increased operating time on a single charge.
• Compact design and light weight.
Temperature protection
The temperature protection system enables to auto-
matically deactivate the power tool in case of excess
load or when the temperature of the battery is exceeding
70°C. The system guarantees protection of the power
tool from damage in case of noncompliance with the
operation conditions.
Overdischarge protection
The battery 2 (Fig. 8) is protected by the safety system
against deep discharge. In case of complete discharge,
the power tool is automatically switched off.
Do not try to switch on the power tool
when the protection system is activated
the battery can be damaged.
Indicators of the state of battery charge (see Fig. 8)
With the push of the button 25 the indicators 26 show
the state of charge of the battery.
Overheating protection
Overheating protection system of the engine automati-
cally switches off the power tool in case of overheating.
In this situation, let the tool cool before turning the
power tool on again.
Overload protection
Overload protection system of the engine automatically