Camera Overview - flir LOREX LNZ3522 Manual De Instrucciones

3

Camera Overview

1. Dome Cover
2. Ethernet Port: Connect the camera to an NVR or PoE switch on your net-
work using the included Ethernet cable.
3. 12V DC Power: If not using PoE, connect the camera to a 12V DC power
source (not included). Power adapters for this camera are available for
purchase on
4. Lens: Camera lens.
5. Microphone: Built-in microphone.
6. GND Port: The pre-inserted screw grounds the camera.
7. Reset Button Compartment: Open using a Phillips screwdriver to reveal
the reset button. Press and hold for 4 seconds to reset camera settings.
#LX400043; r. 2.0/40122/40365; en-US
www.lorextechnology.com (model #: CVA4902).
3