flir LOREX LNZ3522 Manual De Instrucciones página 20

5
Installation
The pegs and notches only align one way. Do not force the camera to fit into the metal
mounting plate.
7. Re-insert the M2x5 screw removed in Step 6. Tighten firmly using the in-
cluded Allen key.
8. Holding the flat side of the back plate against the mounting surface, mark
holes for the mounting screws and the camera cable. Remove the back
plate and drill where marked.
1: Mounting screw holes, 2: Camera cable hole
#LX400043; r. 2.0/40122/40365; en-US
NOTE
14