A3.2 Configuration - Avtech AVC708H Manual Del Usuario

A3.2 Configuration

Before configuring Push Video, make sure:
1. The DVR system is set up as described in "2. CONNECTION AND SETUP" at page 4.
2. The DVR is connected to Internet.
3. You've installed the app, EagleEyes, on your iPhone, iPad or Android mobile devices.
For details, please refer to "APPENDIX 4 MOBILE SURVEILLANCE VIA EAGLEEYES" at page 68.
Step1: Right click to show the main menu.
Go to (ADVANCED CONFIG.)  "NOTIFY" to enable "GUARD" to "ON", and configure your alarm
sensor type (N.C. or N.O.).
CANERA
DETECTION
ALERT
NETWORK
DISPLAY
RECORD
DEVICES
DCCS
IVS
NOTIFY
EXIT
Step2: Open EagleEyes, and add this DVR to the EagleEyes address book.
Note: For more details about EagleEyes operation, please visit www.eagleeyescctv.com.
Step3: Enable Push Video as described below, and try to trigger your sensor to see if you can receive Push Video
successfully.
ADVANCED CONFIG
PUSH VIDEO PUSH MESSAGE
GUARD
CH01 ALARM OFF / INTERNAL ALARM
CH02 ALARM OFF
CH03 ALARM N.O.
CH04 ALARM OFF
APPENDIX 3 PUSH VIDEO CONFIGURATION
MESSAGE MAIL VIDEO MAIL




67
ON
CH1
CH2
office
CH4