Appendix 3 Push Video Configuration; A3.1 Pin Connection - Avtech AVC708H Manual Del Usuario

APPENDIX 3 PUSH VIDEO CONFIGURATION

Note: Available only when your DVR supports Push Video.

A3.1 PIN Connection

This DVR supports sending instant event notifications to your mobile devices, such as iPhone, iPad and Android
mobile devices, for an alarm event (Push Video). However, only certain alarm-in pins support this function.
There are two methods to connect alarm sensors for Push Video to take efforts: via PUSH VIDEO alarm-in
terminal and via external I/O port.
PUSH VIDEO alarm-in terminal
A PUSH VIDEO alarm-in terminal is provided on the DVR rear panel, as shown in the right picture, to help you
quickly find and connect to the pins which support Push Video.
Alarm 1 ~ 4 GND
External I/O port
Check the table below to know which pin for alarm devices supports Push Video and its corresponding video
channel.
PIN
PIN2
PIN15
PIN3
PIN16
Alarm sensor connection
Connect the alarm sensor, such as magnetic contacts, to the PUSH VIDEO alarm-in terminal or I/O pin which
supports Push Video on the DVR rear panel.
Alarm Corresponding video channel
Alarm 1
Alarm 2
Alarm 3
Alarm 4
Corresponding video channel
CH1
CH2
CH3
CH4
APPENDIX 3 PUSH VIDEO CONFIGURATION
CH1
CH2
CH3
CH4
65