Technical Data - Makita EA3600F Manual De Empleo Y De Seguridad

WARNING!
Always stop the engine and make sure that the chain is stopped
before commencing any maintenance or repair work or cleaning
the saw. Allow the chain saw to cool off before doing any
maintenance work (burn hazard)! Chain saws with catalytic
converter take longer to cool down!
Do not attempt any maintenance or repair work not described in
this manual. Have such work performed by your MAKITA service
shop only.

TECHNICAL DATA

Overall length (without guide bar)
Net weight
Stroke volume
Bore
Stroke
Max.power at speed
Max.torque at speed
Idling speed/max. engine speed with bar and chain
Clutch engagement speed
Carburetor
Spark plug
Electrode gap
Fuel tank capacity
Chain oil tank capacity
Mixture ratio (fuel/two stroke oil)
Makita genuine oil or quality grade JASO FC (ISO EGC) or upper
Chain brake
Chain speed (at max. power)
Sprocket pitch
Number of teeth
• Due to our continuing program of research and development, the specifications herein are subject to change without notice.
• Specifications may differ from country to country.
(For Canada) NOTE: This spark ignition system complies with the Canadian standard ICES-002.
Guide bar and saw chain
Guide bar type
Guide bar parts No
Length
Cutting length
Saw chain
Pitch
Gauge
No. of drive links
WARNING:
Use appropriate combination of the guide bar and saw chain. Otherwise personal injury may result.
Model
Type
Maintaining and storing the saw
Keep the chain, bar and sprocket clean and lubricated;
replace worn sprockets or chains.
Keep the chain sharp. You can spot a dull chain when easy-to-cut
wood becomes hard to cut and burn marks appear on the wood.
Keep the chain at proper tension. Tighten all nuts, bolts and screws
except the carburetor adjustment screws after each use.
Keep spark plug and wire connection tight and clean.
Store saws in a high or locked place, away from children.
EA3600F
inch (mm)
lbs (kg)
3
cu. in (cm )
inch (mm)
inch (mm)
kW/rpm
Nm/rpm
rpm
rpm
Type
Type
inch (mm)
fl oz (ml)
fl oz (ml)
Engages manually or in case of kickback.
ft/s (m/s)
inch
Z
Sprocket nose bar
165201-8
14" (350 mm)
12-3/4" (325 mm)
52
12
EA3601F
15-1/4" (388)
9.3 (4.2)
2.15 (35.2)
1.5 (38)
1.2 (31)
1.7/10,000
2.0/7,000
2,900/13,500
4,100
Diaphragm
NGK BPMR 8Y
0.03 (0.7)
10.5 (310)
8.8 (260)
50:1
83 (25.3)
3/8
6
165202-6
16" (400 mm)
14-1/8" (360 mm)
91PX
3/8"
0.05" (1.3 mm)
56