Serial Cable Installation; Twistorr Medium-Tmp On-Board Controller Installation - Agilent Technologies TwisTorr Medium-TMP Manual De Instrucciones

Ocultar thumbs Ver también para TwisTorr Medium-TMP:
17
Technical Information

Serial Cable Installation

Serial Cable Installation

The supplied serial cable must be installed when the controller or the
optional vent valve have to be controlled by means of a remote
computer.
The cable is installed fixing the 9 pin D-type connector into the P2
serial connector as shown in the following figure.
Figure 18 Serial Cable Installation

TwisTorr Medium-TMP on-board Controller Installation

The controller can be mounted in two position:
bottom mounting (as per the complete system)
side mounting.
To install the controller execute the following procedures.
172/181
TwisTorr Medium-TMP on-board Controller User Manual / 87-901-050-01
loading

Este manual también es adecuado para:

X3512-64006X3512-64016