Technical Assistance Service; Ec Declaration Of Incorporation For Partly Completed Machinery; Technical Characteristics - V2 NIUBA-24V Manual De Instrucciones

1.2 - TECHNICAL ASSISTANCE SERVICE

For any installation problem please contact our Customer Service
at the number +39-0172.812411 operating Monday to Friday
from 8:30 to 12:30 and from 14:00 to 18:00.
1.3 - EC DECLARATION OF
INCORPORATION FOR PARTLY
COMPLETED MACHINERY
(DIRECTIVE 2006/42/EC, ANNEX II-B)
The manufacturer V2 S.p.A., headquarters in Corso Principi di
Piemonte 65, 12035, Racconigi (CN), Italy
Under its sole responsibility hereby declares that:
the partly completed machinery model(s):
NIUBA4-24V, NIUBA6-24V
Description: electromechanical actuator for barriers
• is intended to be installed to create a machine according to
the provisions of the Directive 2006/42/EC. The machinery
must not be put into service until the final machinery
into which it has to be incorporated has been declared in
conformity with the provisions of the Directive 2006/42/EC
(annex II-A).
• is compliant with the applicable essential safety requirements
of the following Directives:
Machinery Directive 2006/42/EC (annex I, chapter 1)
Low Voltage Directive 2006/95/EC
Electromagnetic Compatibility Directive 2004/108/EC
Radio Directive 99/05/EC
Directive ROHS2 2011/65/CE
The relevant technical documentation is available at the national
authorities' request after justifiable request to:
V2 S.p.A.
Corso Principi di Piemonte 65, 12035, Racconigi (CN), Italy
The person empowered to draw up the declaration and to provide
the technical documentation:
Cosimo De Falco
Legal representative of V2 S.p.A.
Racconigi, il 05/04/2014

2 - TECHNICAL CHARACTERISTICS

Power supply
Motor power supply
Maximum power
Power in stand-by
Opening time
Operative intermittence
Operating temperature
Protection degree
Weight
- 36 -
NIUBA4-24V NIUBA6-24V
230 V~ 50 Hz
24 Vdc
240W 300W
3.5W 3.5W
3 ÷ 4 s 5 ÷ 6 s
80 % 80 %
(200 cycles/hour (150 cycles/hour
max.) max.)
-20 ÷ +55 °C
IP44
44 Kg 52 Kg