Tool Specifications - Bosch GKS 7 1/4 Professional Instrucciones De Servicio

Tool Specifications

Circular Saw
Article Number
Power
Frequency
Amperage 127 V
220 V
No-load speed
Cutting depht at 90°, max.
Cutting depht at 45°, máx.
Spindle lock
Base Plate
Ø Saw Blade diam (máx.)
Mounting hole
Blade thickness, max.
Teeth thickness/ teeth settings, máx.
Teeth thickness/teeth setting, min.
Weight
Protection class
The values given are valid for nominal voltages [U] of 230/240 V. For lower voltages and models for specific countries, these values
can vary.
Machine Elements
1. On/Off switch
2. Lock-off button for On/Off switch
Machine Elements
3. Spindle lock button
4. Cutting angle scale
1. On/Off switch
5. Winged screw for cutting angle setting 2. Lock-off button for On/Off switch
3. Spindle lock button
6. Winged screw for parallel guide
4. Cutting angle scale
7. Cutting mark, 45°
5. Winged screw for cutting angle setting
8. Cutting mark, 0°
6. Winged screw for parallel guide
9. Parallel guide
7. Cutting mark, 45°
10. Retracting blade guard
8. Cutting mark, 0°
11. Base plate
9. Parallel guide
10. Retracting blade guard
12. Adjustment lever for retracting blade guard
11. Base plate
13. Sawdust ejector
12. Adjustment lever for retracting blade guard
14. Blade guard
13. Sawdust ejector
15. Drive spindle
14. Blade guard
16. Mounting flange
15. Drive spindle
17. Circular saw blade*
16. Mounting flange
18. Clamping flange
17. Circular saw blade*
18. Clamping flange
19. Clamping bolt with washer
19. Clamping bolt with washer
20. Allen key
20. Allen key
21. Winged screw for setting
2 . 1
Winged screw for setting
22. cutting depth scale
22. cutting depth scale
23. Set of screw clamps**
23. Set of screw clamps**
24. Extraction adapter*
24. Extraction adapter*
* Not all of the accessories illustrated or
* Not all of the accessories illustrated or described are included
described are included as standard delivery.
as standard delivery.
** Commercially available (not included in the
** Commercially available (not included in the delivered items)
delivered items)
Intended Use
Intended Use
The machine is intended for lengthways and
crossways cutting of wood with straight cutting
The machine is intended for lengthways and crossways cut-
ting of wood with straight cutting lines as well as mitre an-
lines as well as mitre angles to 45° while resting
gles to 45° while resting firmly on the work piece.
firmly on the work piece.
F 000 622 216 | 10.2011
GKS 7 1/4 Professional.indd 17
GKS7 1-4.indd 15
GKS PROFESSIONAL
060 1546 0..
[W] 1.450
[Hz] 50 / 60
[A]
11,5
[A] 6,6
[min ]
–1 6.100
[mm] 66
[mm] 51
[mm] Yes
[mm] 144 x 301
[mm] 184 (7" ¼)
[mm] 16 (5/8")
[mm] 1,5
[mm] 2,5
[mm] 2,5
[kg] 4,1
/ II
Noise/Vibration Information
Measured values determined according to EN
60 745. Typically the A-weighted noise levels of
Noise/Vibration Information
the machine are: sound pressure level 95 dB (A);
sound power level 110 dB(A). Measurement
Measured values determined according to EN 60 745.
uncertainty K = 3 dB.
Typically the A-weighted noise levels of the machine are:
Wear hearing protection!
sound pressure level 95 dB (A); sound power level 110 dB
(A). Measurement uncertainty K = 3 dB. The typical hand/arm vibration is below 2.5 m s2.
Wear hearing protection!
For Your Safety
The typical hand/arm vibration is below 2.5 m/s
Read all instructions. Failure to
follow all instructions listed below
For Your Safety
may result in electric shock, fire
Read all instructions.
and/or serious injury. Additionally,
structions listed below may result in electric shock,
the general safety instructions either in the
fire and/or serious injury.
enclosed booklet or those added in the centre
Additionally, the general safety instructions either
of these operating instructions must be observed.
in the enclosed booklet or those added in the centre of these
SAVE THESE INSTRUCTIONS.
operating instructions must be observed.
• When working with the machine, always
SAVE THESE INSTRUCTIONS.
hold it firmly with both hands and provide
for a secure stance. The power tool is guided
When working with the machine, always hold it firmly
•
more secure with both hands.
with both hands and provide for a secure stance.
• Secure the workpiece. A workpiece clamped
power tool is guided more secure with both hands.
with clamping devices or in a vice is held
Secure the workpiece.
•
more securely than by hand.
ing devices or in a vice is held more securely than by hand.
• Take protective measures when dust can
Take protective measures when dust can develop
•
develop during working that is harmful to
during working that is harmful to one's health, com-
one's health, combustible or explosive.
bustible or explosive.
Example: Some dusts are regarded as
as carcinogenic. Work with dust/chip extraction and wear a
carcinogenic. Work with dust/chip extraction
dust mask.
and wear a dust mask.
Keep your workplace clean.
•
• Keep your workplace clean. Material
ularly dangerous. Dust of light metal can be inflammable or
explode. mixtures are particularly dangerous. Dust of
light metal can be inflammable or explode.
Do not work materials containing asbestos.
•
• Do not work materials containing asbestos.
is considered carcinogenic.
Asbestos is considered carcinogenic.
17
English |
.
2
Failure to follow all in-
The
A workpiece clamped with clamp-
Example: Some dusts are regarded
Material mixtures are partic-
Asbestos
Bosch Power Tools
15
29/11/11 08:55
26.04.06 17:29:02