Installation
Instructions
m,,um,,,,,,uuluIH,,IHli,,li,i,ll
ml
II
II
luLm
MOVING THE REFRIGERATOR
(CONT.)
[]
DISCONNECT THE POWER COUPLING
(on some models)
If the refrigerator
has a water' dispenser,
there is a power line (harness) from the cabinet
into the bottom hinge on the freezer door that
must be disconnected
To disconnect,
pull apart at the coupling.
[_ DISCONNECT THE ELECTRICAL
CONNECTORS (on some models)
tf the refrigerator'
has a refreshment
center,
there are electrical connectors (harnesses)
from the cabinet into the bottom hinge on the
refrigerator
door that must be disconnected
To disconnect,
pull apart each connector:
Bottom
refrigerator
hinge
H,,,,H,,lUUll IIm
IIIIIIII IIIJ
IIIII
I
[]
CLOSE THE FREEZER AND
REFRIGERATOR
DOORS
[]_] REMOVE THE FREEZER DOOR
[_]
Remove the freezer door top hinge cover bg
either squeezing it and pulling it up or bg
prging it off with a plastic puttg knife
[]
Remove the two 5/16" hex head screws, then
lift the hinge straight up to free the hinge pin,
5/t6" Hex Head
[]
Open the freezer door to 90 °
90°
18