Operating The Appliance - Electrolux EHD60020P Manual De Instrucciones

Display
-
Residual heat indicator
Warning! Risk of burns from
residual heat!

OPERATING THE APPLIANCE

Use the induction cooking zones with
suitable cookware.
On and Off
Touch for 1 second to start or stop the
appliance.
Automatic Switch Off
The function stops the hob
automatically if:
• all cooking zones are off
• you do not set the heat setting after you
start the hob.
• you cover a sensor field with an object (a
pan, a cloth, etc.) for longer than 10 sec-
Automatic Switch Off times
Heat setting
Stops after
The heat setting
Touch to increase the heat setting.
Touch to decrease the heat setting. The
display shows the heat setting. Touch
and at the same time to switch off the
cooking zone.
Keep warm/STOP+GO function is active
The cooking zone operates
Automatic heat up function is active
The induction cooking zone does not sense the cookware
There is a malfunction
A cooking zone is still hot (residual heat)
Lock/Child safety device is on
Power function is active
The automatic switch off is active
.
-
6 hours 5 hours
Description
The induction cooking zones make the heat
directly in the bottom of the cookware. The
glass ceramic is heated by the residual heat
of the cookware.
onds. The sound operates until you re-
move the object.
• the hob gets too hot (e.g. when a sauce-
pan boils dry). Before you use the hob
again, the cooking zone must be cool.
• you use incorrect cookware.
on in the display and after 2 minutes the
cooking zone stops automatically.
• you do not stop a cooking zone or
change the heat setting. After some time
comes on and the hob stops. See the
table.
-
4 hours
electrolux 37
comes
-
1.5 hours