Mounting The Safety Bracket - Electrolux ECCG3672AS Instrucciones De Instalación

36" GAS RANGETOP INSTALLATION INSTRUCTIONS
Countertop cutout for gas and electric
connections
F
914 mm
max: 619 mm
G
min: 612.5 mm
P
min. 102 mm
Q
min. 305 mm
CAUTION
The countertop must be level and
horizontal. The stability of the countertop must be
maintained after the cut-out has been made.

Mounting the safety bracket

The safety bracket is a device designed to prevent
the appliance from being accidentally extracted to
the outside.
1. Measure the width of the slot for the appliance
(see "Cabinet clearances" - clearance F).
36"
max: 24 3/8"
min: 24 1/8"
min. 4"
min. 12"
5
2. Divide the measurement in half and draw the
midline on the surface of the cabinet.
3. Measure 3" (76mm) from the front edge of the
cabinet and draw a line perpendicular to the mid-
line.
4. Position the safety bracket centered with respect
to the intersection point of the two lines just
drawn and then fix it with the two supplied
screws.
NOTES:
• The appliance must sit securely in the cut-out and
must not be able to move around (e.g. during
cleaning).
• To help prevent cosmetic damage place plastic
shipping cover back over appliance prior to load-
ing into cabinetry.
• If additional construction is nearby the plastic
shipping cover can be used to preserve cosmetic
finish.