How To Install The Product; Recommended Tools; How To Install Axis T8606 Media Converter Switch; How To Install Axis T8607 Media Converter Switch - Axis T86 Serie Guia De Instalacion

How to install the product

Recommended tools

• Torx® screwdriver T10
• Cable shoe pliers (grounding cable)
• 7 mm wrench (grounding screw)
• Slotted screwdriver 2.5 mm
• Wire stripping tool (cable connecting AXIS T8607 Media Converter Switch)

How to install AXIS T8606 Media Converter Switch

NO TICE TICE
NO NO TICE
• The media converter switch shall be installed in an environment protected against dust
and water, for example indoors or in an appropriate cabinet.
• The media converter switch shall be connected using shielded network cables (STP)
intended for their specific use. Make sure that the switch is properly grounded. For
regulatory requirements, see Electromagnetic compatibility (EMC) 2 .
For locations of the hardware components, see page 5.
1. Mount the media converter switch on the wall or, if applicable, attach it to a DIN rail in
a cabinet.
2. Connect the network cables to the network connectors (RJ45, SFP) as required.
3. Connect the power cable to the power connector (DC input).
4. Earth the switch by connecting to the grounding screw.
5. Make sure the LED indicators on the media converter switch indicate the correct
conditions, see Media converter switch LED indicators on page 14.

How to install AXIS T8607 Media Converter Switch

NO TICE NO NO TICE TICE
• Make sure the connections to the mains supply and conduits have been installed by a
trained professional, according to the manufacturer's instructions and in compliance
with local regulations.
• The power supply (sold separately) and the media converter switch shall be installed in an
environment protected against dust and water, for example indoors or in an appropriate
cabinet.
1. Make sure the mains supply is switched off.
2. Mount the power supply and the media converter switch on the wall or, if applicable,
attach them to a DIN rail in the cabinet. If drilling is required, make sure to use drill bits,
screws, and plugs that are appropriate for the material.
AXIS T86 Media Converter Switch Series
7