GE SPACEMAKER DSXH47 Manual Del Usuario página 21

Error Codes
If the dryer stops, the status lights flash and the signal beeps, an error has occurred. Press PAUSE/CANCEL. Consult the
Error Code Chart below for the possible cause and solution. Make the correction, select a cycle and press START. If the
dryer stops, status lights flash again and the beeping continues, please contact service for assistance.
Error Code, Error
4 beeps, Dryer ran
too long
6 beeps, Push button does
not function
Possible Causes
Lint filter blocked, ventilation
system clogged or dryer
overloaded
Push button held too long or
wedged in the control panel
What To Do
• Remove lint; wash the lint filter to remove softener sheet
residue. Clean out the ventilation system. Reduce load
size.
• Press buttons lightly and release. Disengage the button.
21