Idiomas disponibles
Idiomas disponibles
InstallCabinetDoorsand CabinetFrontCrossbar
Insert t heCabinet L eftDoorBottom Pininto
the Cabinet
Bottom Panel (Inset 1). While holding the
door in position, place the Cabinet
Front Crossbar onto the Cabinet
Left Door Top Pin (Inset 2),
making sure the door magnets are facing outward
as shown.
Attach the Cabinet
Front Crossbar to
the Cabinet Left Panel using 2 Phillips Head Bolts (M6x55mm).
Do not fully tighten bolts at this time.
Repeat above procedure to place the Cabinet
Right Door into position, but attach Cabinet Front
Crossbar to Right Front Leg with Phillips Head Bolts (M6x55mm).
Do not fully tighten bolts at this
time.
Attach Cabinet Front Crossbar to the Cabinet Right Panel using 1 Phillips Head Bolt (M4x8mm)
(Inset
3). Fully tighten all Front Crossbar Bolts at this time.
Phillips Head Bolt
M6x55mm
Qty: 4
Phillips Head Bolt
M4x8mm
Qty: 1
Inset 2
Inset 3
Inset 1
_
Attach
the Firebox
Assembly
to the Cabinet
Frame
With the aid of an assistant, place the Firebox onto the Cabinet
Frame.
Cut the tie holding the
Regulator
Hose in place, and insert Regulator
through the hole in the Right Side Panel.
Line up the holes and attach the Firebox to the Cabinet Frame using 4 Phillips Head Bolts
(M6x13mm).
Attach Side Burner Lower Panel to the Cabinet Legs using 2 Phillips Head Bolts
(M4x8mm).
Note:
You may need to slide the Firebox Assembly forward,
backward,
or lift slightly
for the bolt holes to properly
line up.
Phillips Head Bolt
M4x8mm
Qty: 2
Phillips Head Bolt
M6x13mm
Qty: 4
Side Burner Lower Panel
19
