Electric Connection Rules - Ugur UDF 3 SL Guia Del Usuario

C- INSTALLATION OF YOUR DEEP FREEZER

Electric Connection Rules

The product will start when you insert the plug into the outlet as shown in picture 5.
WARNING!
• It is forbidden to insert the plug into multiple socket and to use extension cord. (Picture 6)
• There is no separate on-off switch on your product.
• Do not contact the cables of your product, which are connected to the mains, to hot surfaces.
The outlet you will use must be grounded. Furthermore, the outlet to be used must have the resistance of at least 10-16 A
and be protected with a suitable fuse. Definitely take assistance from our technical service or a competent electrician with
regards to the fuse that should be present on the mains where the outlet is connected.
Mains voltage and frequency must be same with the value written on the label inside your product. If your mains voltage
is extremely below or above the value indicated, definitely supply demanded voltage by using a voltage regulator. You can
get assistance from an expert electrician with this regard.
Do not place your product's cord onto passageways. This may cause you to get injured and damage your cooler. (Picture 7)
EN
PICTURE 5 PICTURE 6
44
PICTURE 7