Silk’n Tightra Manual Del Usuario página 17

Never use flammable liquids such as alcohol (including
U
perfumes, sanitizers, or other applications containing
alcohol), or acetone to clean the skin before use.
Remove all piercing or metal from the treatment area
U
before use.
6.2 Internal mode treatment
1. Apply a small amount of the gel supplied with the device
to all the electrodes (#6, #7). There is no need to apply gel
internally.
2. For internal mode treatments, turn on the device by long
pressing the control button (#3). The internal mode will
be active, and the device will be set to energy level 1. The
treatment indicator light (#4) will be off (no light). You
will feel a vibration and the device is ready for use.
3. Lie down and make yourself comfortable. Start your
treatment at energy level 1.
Insert the electrodes (#6, #7) into the vagina as far as is
4.
comfortable for you. When the device is inside the vagina
you need to make sure that the device is supported during
treatments:
If your legs are splayed out on the bed, close your legs
y
slightly to hold the device in place.
If you lie with your legs bent (and feet on the bed),
y
place a cushion under the device to hold the device
in place.
You might also wish to hold the device, if you find that
y
helps to keep the device in place.
During the treatment, you will feel a vibration approximately
Z
once a minute.
15
EN