Service And Maintenance - ProMed tens 1000 s Manual De Instrucciones

tens1000s_manual_020505 02.05.2005
T
ROUBLESHOOTING
If your TENS unit is not functioning correctly
1. Make sure that the battery is correctly inserted or replace the
battery. When inserting a battery, make sure that the polarity
is correct.
2. If the ON/OFF LED is flashing and there is no stimulation,
check that the leads are attached correctly and that the electro-
des are correctly positioned. If the unit seems to be functio-
ning, yet you still feel no stimulation, it is possible that the elec-
trodes or the leads need replacing.
3. If the battery is charged but the unit is not working, turn both in-
tensity controls 2 to the OFF position (counterclockwise) and then
slowly back to the ON position.
12:05 Uhr Seite 43
/ S M
ERVICE AND AINTENANCE

Service and maintenance

If you should experience other problems, consult your dealer, re-
turning the unit if necessary. Never attempt to repair a fault
yourself.
For repair or maintenance, send the
ler to:
Promed GmbH Kosmetische Erzeugnisse
Technical Customer Service
Lindenweg 11
D-82490 Farchant
Tel. +49 (0) 8821 96 21-0
Fax +49 (0) 8821 96 21 21
D
via your dea-
tens 1000 s
US
F
I
E