Tabla de contenido
Idiomas disponibles
Idiomas disponibles
KMD 03
Digital multimeter
Specifications
The meter should be recalibrated annually. When calibrating, temperature
should be 18°C~28°C, and relative humidity should be less than 75%.
General
Range:
Overload protection:
Max. Input between terminals
and earth ground:
Operational height:
Display:
Polarity indication:
Overload indication:
Sampling rate:
Unit display:
Auto off time:
Power Source:
Battery low voltage
indication:
Temperature coefficient:
Operating temperature:
Storage temperature:
Dimension:
Weight:
Instructions manual |
24
Manual and automatic
Full measuring range overload protection
600V DC or AC (RMS)
2000m
LCD, max. value 3999 digits
automatical indication, '-' means
negative polarity
Display shows'OL' or '-OL'
digital display is about 0.4 sec/time, analog
display 0.04 sec/time (except current
measurement). When measuring current,
digital display is about 1 sec/cycle, analog
display 0.1 sec/cycle.
30 min
When battery voltage drops below normal
operating voltage,
display.
9V, 6F22 battery
LCD displays
symbol.
Less than 0.1×accuracy/°C
0°C ~ 40°C
-10°C ~ 50°C
180×86×52mm
about 250 g (not including battery)
is shown on the
www.grupotemper.com
Capítulos
Tabla de contenido
