Tabla de contenido
Idiomas disponibles
Idiomas disponibles
KMD 06
Digital multimeter
jack.
• Connect the red test lead to the positive (+) end and the black test lead
to the negative (-) end of the battery and read the measurement on the
display
Warning
To prevent injury or damage to the meter, do not connect the meter to a
battery with a voltage rating exceeding 60V AC or 30V DC.
Specifications
General specifications
Safety Rating:
Operating altitude:
Operating Temperature/
Humidity:
Storage Temperature/
Humidity:
Max. Input between terminals
and earth ground:
Fuse protection:
Sample rate:
Display:
Overload Indication:
Low Battery Indication:
Polarity Indication:
Power Source:
Instructions manual |
22
CAT III, 600V; pollution degree II
<2000m
0°C to 40°, <80% RH
-10°C to 60°C, <70% RH, remove battery
600V DC or AC rms
10A range: F1: F 10A H 600V
mA range: F2: FF 400mA H 600V
Approx. 3 times/sec.
3 ½ digit LCD display
Display shows OL
When battery voltage drops below normal
operating voltage,
display.
Display automatically displays "-"
1 x 9V battery
is shown on the
www.grupotemper.com
Capítulos
Tabla de contenido
