Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Bagger Operation
NOTE: When all of the grass bags are full, place the tractor on a firm, level
surface, disengage the PTO, turn the tractor engine off and set the parking
brake.
1.
Pivot the seat forward and up.
2.
Lift up grass bag cover by pushing in on the rear, right-side tab with your
right hand, as seen in 1 of Figure 23, and lifting the cover with your left
hand in the center rear of the bagger cover, 2. Do not remove the chute tube
assembly from the tractor.
2
3.
Remove the grass bags, as shown in Figure 24, by lifting each bag up (1) and
moving the bags away from the bag support assembly (2).
OPERATION
1
Figure 23
2
4.
Empty the grass clippings at a proper disposal sight, use the handle at the
bottom of each grass bag. Holding the bag firmly, empty the contents
5.
Replace the grass bags in the reverse order and in the same orientation in
which they were removed, close lid, pivot down the seat, restart your tractor
and resume cutting your grass.
15
1
Figure 24
Tabla de contenido
