Testing With Control Solution - OneTouch VerioIQ Manual De Usuario

Testing with control solution

OneTouch Verio® Control Solution is used to check that the
meter and test strips are working together properly and
that the test is performing correctly. (Control solution is
available separately.)
NOTE:
• Use only OneTouch Verio® Control Solution, Level 3 (Mid)
or Level 4 (High), with your OneTouch Verio IQ® Meter.
Either level can be used to check your system.
• When you first open a new vial of control solution,
record the discard date on the vial label. Refer to the
control solution insert or vial label for instructions on
determining the discard date.
• Tightly close the cap on the control solution vial
immediately after use to avoid contamination
or damage.
Taking a test
47
2