Section I - Alliance Laundry Systems JT37CE Instalación Operación Mantenimiento

IMPORTANT: Warranty is void unless drying tumbler is installed according to instructions in this manual.
Compliance with minimum specifications and requirements detailed herein, and with applicable local gas fitting
regulations, municipal building codes, water supply regulations, electrical wiring regulations, and any other
relevant statutory regulations. Because of varied requirements, applicable local codes should be thoroughly
understood and all pre-installation work arranged for accordingly.
In the U.S.A., installation must conform to the latest edition of the American National Standard Z223.1 "National
Fuel Gas Code" and Standard ANSI/NFPA 70 "National Electric Code".
In Canada, installation must comply with Standards CAN1-B149.1 or CAN1-B149.2 codes for gas burning
appliances and equipment and CSA C22.1, latest edition, Canadian Electric Code, Part I.
In Australia, installation must comply with the Australian Gas Association Installation Code for Gas Burning
Appliances and Equipment.
Failure to install, maintain, and/or operate this machine according to manufacturer's
instructions may result in conditions which can produce serious injury, death and/or
property damage.
NOTE: The WARNING and IMPORTANT instructions appearing in this manual are not meant to cover all
possible conditions and situations that may occur. It must be understood that common sense, caution and
carefulness are factors which CANNOT be built into this tumbler. These factors MUST BE supplied by the
person(s) installing, maintaining or operating the tumbler.
Always contact your dealer, distributor, service agent or the manufacturer on any problems or conditions you do
not understand.
70369801

SECTION I

Safety
WARNING
W051R1
3