Set Up; Confi Guration; Choosing Languages; Pairing Remote Controls - SOMFY FX24 Manual De Instalación

SET UP

Confi guration
Set up requires using controller buttons.
Press... To...
OK Call up the menu and
submenu Validate a set up
selection
+ or - Choose settings Change a
setting value
+ and – Exit the active menu
(pressed
together)
The changes made are validated by pressing the OK button.
When the FX24 is switched on, the following information is displayed on-screen:
• Somfy
• Product name
• the controller software version,
• the total number of open and close operations performed (a value displayed in thousands). For the fi rst thousand
operations, the screen displays "0000".
Pressing OK during the presentation phase lets the user move straight to the fi rst menu.

Choosing languages

This function is used to choose the programming
language on-screen:
• Italian (ItA)
• French (FrA)
• German (dEU)
• English (EnG)
• Spanish (ESP)
[1] Use the + and – buttons on the control unit to
access the "LAnGUE" (Language) menu.
[2] Press the OK button.
[3] Use the + and – buttons to call up the desired
language.
[4] Press the OK button to validate your choice.

Pairing remote controls

To pair a remote control:
[1] Press the "PROG" button on the controller
for two seconds. The red indicator comes on.
[2] Press the remote control channel button
within two minutes of starting the process.
The red indicator blinks.
The remote control is paired.
Note: Performing this procedure for a channel
that is already paired will clear it.
To add more remote controls:
Repeat the same procedure.
Copyright © 2008 Somfy SAS. All rights reserved.
7