Residual Risks - Pfannenberg Rack Serie Libro De Instrucciones

3. Residual risks

There are some residual risks after the installation of the unit that have to be considered:
Residual risks according to 2006/42/CE Directive:
•
The condenser has fins on his external surface, so there is the possibility for the operator to touch sharp edges
during service of the unit.
•
Although the unit is designed with all the possible safety requirements, in case of external fire there is the
possibility that the internal pressure and temperature of the unit will increase in a dangerous and uncontrollable
way; in that case use the extinguishing tools suitable for that conditions.
Residual risks according to 97/23/CE Directive:
•
Although the unit is designed with all the possible safety requirements, in case of external fire there is the
possibility that the internal pressure and temperature of the unit will increase in a dangerous and uncontrollable
way; in that case use the extinguishing tools suitable for that conditions.
For the series production of the standard units of category , the pressure resistance test (typically the hydrostatic
•
pressure test) is made on a statistic base, not on all units.
This can be accepted, also considering all the safety devices mounted on the units.
4. Receiving and Unpacking
Each unit is packed in a carton box.
It is recommended to pay particular attention during handling and transportation of the unit and to maintain the packaged units in
the vertical position, in order to avoid any kind of dents to the external frame and any damage to the internal components.
Secure units to the transport vehicle with suitable strapping.
EB Models Packaging solution
Chiller supplied on a wooden
EB 30 – 43 – 60 WT
EB 75 – 90 WT
pallet and protected by
EB 130 – 150 WT
a cardboard box
Chiller supplied on a wooden
EB 190 – 250 WT
pallet and wrapped
EB 300 – 350 – 400 WT
with protective film
Note!
The above mentioned packages are not suitable for piling up units on top of each other
Store the Chiller in a dry place, away from heat sources. All waste materials should be recycled in the appropriate manner.
For the operations of lifting and movement it is necessary to use a fork lift truck with proper load capacity and with forks longer
than the base of the Chiller. Avoid sudden movements which can damage the framework and the internal components.
PFANNENBERG Std Chiller (above 45Kg weight) are also provided with 4 eye bolts for lifting and transportation; to be used for
vertical loading/unloading only (to see the right point for lifting please refer to the stickers on the unit).
Check after the final positioning of the Chiller the internal connections to avoid damage during operation.
English
Picture 1 – Chiller lifting
6