Unpacking; Contents Of The Shipping Container - Powermatic PJ-882 Manual De Operación Y Partes

Unpacking

Open shipping container and check for shipping
damage. Report any damage immediately to
your distributor and shipping agent. Do not
discard any shipping material until the Jointer is
assembled and running properly.
Compare the contents of your container with the
following parts list to make sure all parts are
intact. Missing parts, if any, should be reported
to your distributor. Read the instruction manual
thoroughly for assembly, maintenance and
safety instructions.
Read and understand the entire contents of this manual before attempting set-up
or operation! Failure to comply may cause serious injury.

Contents of the Shipping Container

1 Jointer
1 Cutterhead guard
2 Push blocks
1 8mm/10mm Open-end wrench (PJ-882 only)
1 3mm Hex wrench (PJ-882 only)
1 4mm Hex wrench
1 5mm Hex wrench
1 Owner's Manual
1 Warranty Card
1 Aluminum knife gauge (PJ-882 only)
2 Star point screwdrivers (PJ-882HH only)
10 Knife insert screws (PJ-882HH only)
5 Knife inserts (PJ-882HH only)
8