Tabla de contenido
Idiomas disponibles
Idiomas disponibles
INSTALLATION INSTRUCTIONS
8. Review your Rola Fit Kit instructions for the correct placement of the gasket pads and door frame
straps. Open the end support covers by turning the quarter turn plugs to the unlocked icon
position. Install the straps and gasket pads as shown.
9. Apply car position stickers to the inside of the end support cover doors. This will help reposition
the cross bars if removed later.
10. Using the ROLA torque wrench, insert the tool into the tensioning bolt on each end support.
Completely loosen the strap assembly (the bolt will stop turning when completely loose).
!
RL
RR
PAGE 9
59970N Rev B • Questions? (800) 234-6992 • ROLAProducts.com
Tip: Install outboard edge of gasket to
the pivot foot first, then push on the
inboard side of the gasket, as shown.
FR
Tabla de contenido
