Steam Dispensing - La Cimbali M39 Dosatron TE Manual De Uso E Instalación

Scalding hazard! Use the appropriate
insulating devices (A) to move the water
and steam wands.
Dispensing with the Turbosteam selector (13)
Machines equipped with the TURBOSTEAM (STOP
STEAM) dispensing system have the "stop steam dispensing
when set temperature is reached" function, and can rapidly
heat and froth milk.
The Turbosteam selector keys have different functions
frothed milk (high froth);
TS4
frothed milk (medium froth);
TS3
frothed milk (low froth);
TS2
heated milk;
TS1
steam.
NOTE: During the programming phase, the Turbosteam
differently according to different needs.
Insert the steam nozzle (9a) into a suitable container,
making sure the bulb is completely immersed in the milk.
Choose the type of milk you prefer and press the related key.
Once the set temperature has been reached, steam
dispensing will stop automatically.
Dispensing can be interrupted at any time by pressing any
Turbosteam selector key (13).
Steam dispensing with knob control
The steam frother system (20) is suitable for beverages
gradually opened.
Insert the steam dispensing wand (9) in a suitable container.
Open the steam and close it when the beverage is heated.
Cleaning of steam dispensing pipes
At the conclusion of each steam dispensing
phase:
- Using a clean sponge, wash with hot water
removing any organic residue present. Rinse
carefully.
- clean the inside of the steam nozzle as
follows:
Turn the nozzle towards the cup tray and
carefully activate steam dispensing at least
once.

15. Steam dispensing

A
14 EN
TS1
TS4
TS3
13
9a
20
9
TS2
A