Installation Procedure To Davit System; Installation Procedure To Quad Pod; Installation Procedure To Wall Mount - Sperian Miller MightEvac MR40K Manual De Instrucciones

5.5 Installation Procedure
to Davit System
Step 1: Place bracket over Davit System, align the top
holes of the bracket with the hole of the Davit
System and insert pin completely through bracket
and Davit System.
Step 2: Align the bottom holes of the bracket with the
holes in the Davit System. Insert the pin com-
pletely through the bracket and the Davit System.
To remove the device, simply reverse the installation
procedure.
Fig. 6

5.7 Installation Procedure to Wall Mount

Step 1: Place bracket over tubing of Wall Mount, align the
bottom holes of the bracket with the desired hole in
the Wall Mount and insert pin completely through
the bracket and tubing of the Wall Mount.
Step 2: Push pin through the top holes of the bracket
passing behind the tubing of the Wall Mount. Make
sure pin goes completely through both sides of the
bracket.
To remove the device, simply reverse the installation
procedure.
Us er I ns t r u ct ion s - En gli sh
(Ref. Fig. 5)
5.6 Installation Procedure
to Quad Pod
Step 1: Place bracket over tubing of Quad Pod and align the
bottom holes of the bracket with the desired holes
in the tubing of the Quad Pod. Insert pin completely
through both the bracket and tubing of the Quad Pod.
Step 2: Push pin through the top holes of the bracket passing
behind the tubing of the Quad Pod. Make sure pin
goes completely through both sides of the bracket.
To remove the device, simply reverse the installation procedure.
11
Fig. 5
(Ref. Fig. 6)
Fig. 7
(Ref. Fig. 7)