Wrinkle Guard - KENMORE ELITE SENSOR SMART 110.70092991 Manual Del Propietario E Instrucciones De Instalación

CHOOSING OPTIONS
Use this control to select the desired
options for your drying cycle.
USING WRINKLE GUARD

WRINKLE GUARD

that form when you cannot unload the
dryer promptly at the end of a cycle.
• If you do not open the door at the
end of a cycle, WRINKLE GUARD
will periodically tumble the clothes
without heat.
• This action will continue for about
2 1 ⁄ hours unless you open the dryer
2
door sooner.
• Turn WRINKLE GUARD
pressing WRINKLE GUARD
• If WRINKLE GUARD
the dryer stops after Cool Down and
may be unloaded.
During WRINKLE GUARD
OF CYCLE SIGNAL will sound after each
period of tumbling, unless it is off.
® III
® III prevents wrinkles
®
® III on or off by
® III pad.
® III is not selected,
® III, the END
DAMP DRY SIGNAL
The DAMP DRY SIGNAL alerts you
when your clothes are ready to be
removed for hanging up, which saves
on ironing.
Selecting the DAMP DRY SIGNAL
provides an audible signal to notify you
when your load is 80% dry. At this time,
you may remove partially dry items to
hang up (which saves on ironing) or the
lighter items of a mixed load (e.g. sheets
and towels.)
TOUCH UP
Use this cycle to get high or low heat
to smooth synthetic and permanent
press clothes that are clean but wrin-
kled from being crowded in a closet or
suitcase.
• Use the Heavy Duty setting to get 30
minutes of high heat for medium to
heavy weight fabrics such as bed-
spreads, jeans, corduroys or work
clothes.
III
• Use the Delicate setting to get 20
minutes of low heat for light to medium
weight fabrics such as blouses, shirts,
skirts or pants.
• Cycle time may be adjusted by pressing
the MORE TIME or LESS TIME pads.
• The WRINKLE GUARD
available in TOUCH UP. Remove clothes
immediately when tumbling stops.
• Can also be used to finish drying cloth-
ing items that are still slightly damp at
the end of the cycle.
® III option is also
29