General Information; General Description Of The Machine; Pictograms - Sima HALCON 65 Manual De Instrucciones Original

1. GENERAL INFORMATION

WARNING: Pease read and understand perfectly the present instruction before using the machine.
SIMA S.A. thanks you for your trust in our products and for purchasing the HALCON 60 POWER TROWEL
model
This manual provides you with the necessary instructions to start, use, maintain and in your case, repair of
the present machine. All aspects as far as the safety and health of the users is concerned have been stated.
Respecting all instructions and recommendations assures safety and low maintenance. As such, reading this manual
carefully is compulsory for any person responsible for the use, maintenance or repair of this machine.
As such, reading this manual carefully is compulsory for any person responsible for the use, maintenance or
repair of this machine.
It is recommended to have always this manual in an easily accessible place where the machine is being
used.

2. GENERAL DESCRIPTION OF THE MACHINE

 The HALCON 60 POWER TROWEL models are intended to perform to functions: troweling + edging
 Special machine for small areas, both on edging and troweled areas, thanks to the protective ring of
blades which allows us to approach the maximum allowed to the wall without the blades stumble on
the wall.
 Allows Trowel through doors.
 HALCON 60 POWER TROWEL models are designed and constructed to smooth and finish horizontal
surfaces of concrete through the rotary motion of four-bladed rectangular no-wear steel. The motion
is transmitted through a gearbox driven by a gasoline engine or electric, according to versions, and
progress over the area to try is manually controlled by a single operator.
 HALCON 60 POWER TROWEL models have a wheel-driven mechanism, which regulates the inclination
of the blades at all times to suit the characteristics of the surface being treated, the wheel is located
on the handlebar height driving machine and the scope of the operator thereby facilitating the
control of the inclination of the blades.
 HALCON 60 models can be fitted with two types of blades in relation to the area to work, finishing
blades when you need a blade finish and floats for the preparation or initial surface preparation
work( float disk as well), these latest are mounted over the finishing blades.
 Transmission to generate the motion of the rotor is made by flexible belt and a clutch, the
transmission is protected by a guard that prevents access to moving parts.
 Handlebar height adjustable to suit the operator and foldable on the engine which makes these
models a light engine to be moved on vehicles.
 The machine has a suspension hook for transport or lifting by cranes.
 They have a Standard Security System with automatic shutdown, integrated on the handlebar.
Any other use given to this machine is considered inappropriate and may be dangerous, so is expressly
prohibited.

2.1 PICTOGRAMS

Pictograms included in the machine entail the following:
READ INSTRUCTIONS
MANUAL
USE SAFETY GLOVES
USE HELMET AND EYE AND
AUDITIVE PROTECTION
USE SAFETY BOOTS