Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Operation
on the remote
5. Press any button on the
remote control within that 10
seconds.
This will synchronize the remote
control and receiver.
Remote Control Usage
The remote control operates the
fireplace levels sequentially (from
off): flames only; to flames and
low heat; to flames and high heat.
The level is increased every time
the ON button is pressed on the
remote control and the fireplace
can be turned off at any point by
pressing the OFF button.
20
control.
Battery Replacement
To replace the battery:
1. Slide battery cover open on
the remote control (Figure
19).
2. Install one (1) 12-Volt (A23)
battery in the battery holder.
3. Close the battery cover
Battery must be recycled
or disposed of properly.
Check with your Local
Authority or Retailer for recycling
advice in your area.
www.dimplex.com
Capítulos
Tabla de contenido
