Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Warranty .........................................
2
Safety Rules ....................................
2-5
Unpacking .......................................
5
Assembly ......................................
5-8
Installation ......................................
8-9
Operation .....................................
9-13
Maintenance ..................................
13-14
Repair Protection Agreement
.......................
14
Troubleshooting
...............................
16-17
Parts Illustration and List ........................
18-25
Espa_ol ........................................
26
CRAFTSMAN
PROFESSIONAL
FULL WARRANTY
If this Craftsman Professional tool fails due to a defect in mate-
rial or workmanship within one year from the date of purchase,
call 1-800-4-MY-HOME®TO
ARRANGE FOR FREE REPAIR
(or replacement if repair proves impossible).
This warranty does not cover the blade, which is an expend-
able part.
This warranty gives you specific legal rights and you may also
have other rights which vary from state to state.
Sears, Roebuck and Co., Hoffman
Estates, IL 60179
WARNING:
For your own safety, read all of the instructions
and precautions before operating tool.
PROPOSITION
65 WARNING:
Some dust created by
power sanding, sawing, grinding, drilling and other construc-
tion activities contains chemicals
known to the state of
California to cause cancer, birth defects or other reproductive
harm.
Some examples of these chemicals are:
•
Lead from lead-based
paints.
•
Crystalline
silica from bricks and cement
and other
masonry
products.
•
Arsenic
and chromium
from chemically-treated
lum-
ber.
Your risk from these exposures vary, depending on how often
you do this type of work. To reduce your exposure to these
chemicals: work in a well ventilated area and work with
approved safety equipment. Always wear OSHA/NIOSH
approved, properly fitting face mask or respirator when using
such tools.
CAUTION:
Always follow proper operating procedures as
defined in this manual i
even if you are familiar with use of
this or similar tools. Remember that being careless for even a
fraction of a second can result in severe personal injury.
BE PREPARED
FOR JOB
•
Wear proper apparel. Do not wear loose clothing, gloves,
neckties, rings, bracelets or other jewelry which may get
caught in moving parts of machine.
•
Wear protective hair covering to contain long hair.
•
Wear safety shoes with non-slip soles.
•
Wear safety glasses complying with United States ANSI
Z87.1. Everyday glasses have only impact resistant lens-
es. They are NOT safety glasses.
•
Wear face mask or dust mask if operation is dusty.
•
Be alert and think clearly. Never operate power tools when
tired, intoxicated or when taking medications that cause
drowsiness.
PREPARE
WORK
AREA
FOR JOB
•
Keep work area clean. Cluttered work areas invite acci-
dents.
•
Do not use power tools in dangerous environments.
Do not
use power tools in damp or wet locations. Do not expose
power tools to rain.
•
Work area should be properly lighted.
•
Keep visitors at a safe distance from work area.
•
Keep children out of workplace. Make workshop childproof.
Use padlocks, master switches or remove switch keys to
prevent any unintentional
use of power tools.
•
Keep power cords from coming in contact with sharp
objects, oil, grease and hot surfaces.
TOOL SHOULD
BE MAINTAINED
•
Always unplug tool prior to inspection.
•
Consult manual for specific maintaining and adjusting pro-
cedures.
•
Keep tool lubricated and clean for safest operation.
•
Remove adjusting tools. Form habit of checking to see that
adjusting tools are removed before switching machine on.
•
Keep all parts in working order. Check to determine that
the guard or other parts will operate properly and perform
their intended function.
•
Check for damaged parts. Check for alignment of moving
parts, binding, breakage, mounting and any other condi-
tion that may affect a tool's operation.
•
A guard or other part that is damaged should be properly
repaired or replaced. Do not perform makeshift repairs.
(Use parts list provided to order replacement parts.)
•
Maintain proper adjustment of rip fence and blade guard.
•
Never adjust saw while running. Disconnect power to avoid
accidental start-up.
•
Have damaged or worn power cords replaced immediately.
•
Keep blade sharp for efficient and safest operation.
KNOW
HOW TO USE TOOL
•
Use right tool for job. Do not force tool or attachment to do
a job for which it was not designed.
•
Disconnect tool when changing blade.
•
Avoid accidental start-up. Make sure that the tool is in the
"off" position before plugging in, turning on safety discon-
nect or activating breakers.
•
Do not force tool. It will work most efficiently at the rate for
which it was designed.
•
Keep hands away from blade and moving parts and cutting
surfaces.
•
Never leave tool running unattended. Turn the power off
and do not leave tool until it comes to a complete stop.
•
Do not overreach. Keep proper footing and balance.
•
Never stand on tool. Serious injury could occur if tool is
tipped or if blade is unintentionally contacted.
•
Know your tool. Learn the tool's operation, application and
specific limitations.
© Sears, Roebuck and Co,
2
Tabla de contenido
