Precautions And General Guidelines - Panduit CT-600-A Instrucciones De Operación

© Panduit Corp. 2013

PRECAUTIONS AND GENERAL GUIDELINES

Always observe the following safety precautions when using this tool:
Read and understand all of the instructions and safety information in this manual
before operating or servicing this tool.
Failure to observe this warning can result in severe injury or death.
Electric Shock Hazard:
•
•
Failure to observe this warning can result in severe injury or death.
•
•
Failure to observe this warning can result in severe injury or death.
Wear eye protection when operating or servicing this tool.
Failure to wear eye protection can result in serious eye injury from flying
debris.
OPERATING INSTRUCTIONS
WARNING
WARNING
Verify electrical power is "OFF" before working on wiring with this tool. It is
not designed to insulate against shock and should never be used on live
electric circuits.
Do not use with frayed, abraded or cut air hose.
WARNING
Do not remove the Safety Guard from the tip of the crimping head. It is
designed to guard against accidental closure on hands and is intended for
the operator's safety.
Always lock the actuating lever in the neutral position when the tool is not in
use. To lock the tool, move the Safety Lock to the "DOWN" position.
WARNING
WARNING
•
Do not exceed air pressure of 115 psig.
Page: 1 of 12
CT-600-A