Atex Installation Drawing - PR electronics 9113 Manual De Instrucciones

ATEX Installation drawing

9113
For safe installation of 9113B the following must be observed. The module shall only be
Installed by by qualified personnel who are familiar with the national and international laws,
directives and standards that apply to this area.
Year of manufacture can be taken from the first two digits in the serial number.
4501
For Installation in Zone 2 / Division 2 the following must be observed.
The 4501 programming module is to be used solely with PRelectronics modules. It is important
that the module is undamaged and has not been altered or modified in any way. Only 4501
modules free of dust and moisture shall be installed.
ATEX Certificate: ............................................................KEMA 07ATEX 0148 X
Marking:.........................................................
Hazardous area
Zone 0,1,2, 20, 21, 22
Revision date:
2009-08-24
9113 - Product Version 9113-001
Non Hazardous area
or Zone 2
-20 ≤Ta ≤ +60ºC
44
43
42
41
54
53
52
51
91 92 93 94 95
Power
Rail
Version Revision:
V2 R0
9113QA01
II 3 G Ex nA nC IICT4
II (1) G [Ex ia] IIC/IIB/IIA
II (1) D [Ex iaD]
4501
34
33
32
31
14
13
12
11
9113
(terminal 11,12,13,14)
(terminal 31,32,33,34)
(terminal 91,92,93,94,95)
U : 253V, max 400Hz
m
Prepared by:
PB
Page:
1/3