PR electronics 9113 Manual De Instrucciones página 30

IECEx Installation drawing
9113
For safe installation of 9113B the following must be observed. The module shall only be
Installed by by qualified personnel who are familiar with the national and international laws,
directives and standards that apply to this area.
Year of manufacture can be taken from the first two digits in the serial number.
4501
For Installation in Zone 2 / Division 2 the following must be observed.
The 4501 programming module is to be used solely with PRelectronics modules. It is important
that the module is undamaged and has not been altered or modified in any way. Only 4501
modules free of dust and moisture shall be installed.
IECEx Certificate: ............................................................KEM 09.0052 X
Marking
Standards
Hazardous area
Zone 0,1,2, 20, 21, 22
Revision date:
2009-08-24
9113 - Product Version 9113-001
Ex nA nC IIC T4 Gc
[Ex ia Ga] IIC/IIB/IIA
[Ex ia Da] IIIC
IEC60079-15 :2005, IEC60079-11:2006, IEC60079-0: 2007
IEC60079-26: 2006, IEC61241-0: 2004, IEC61241-11:2005
Non Hazardous area
or Zone 2
-20 ≤Ta ≤ +60ºC
44
43
42
41
54
53
52
51
91 92 93 94 95
Power
Rail
Version Revision:
V2 R0
4501
34
33
32
31
14
13
12
11
9113
(terminal 11,12,13,14)
(terminal 31,32,33,34)
(terminal
91,92,93,94,95)
U : 253V, max 400Hz
m
Prepared by:
PB
9113QI01
Page:
1/3